PB

Stainless steel PB pole without Eyebolt with base 400x160mm

Intermediate cable guide in AISI 304 stainless steel with fasteners: M16 self-locking nut and Ø16 mm washer.

Vertical fairlead for trolley with bolts included: 1 hex head bolt M16x35, 1 countersunk head bolt M16x35, plus self-locking nut and Ø16 washer, stainless steel AISI 304.

Adjustable vertical fairlead 0–45° for shuttle with hardware: 1 hex head bolt M16x35, 1 countersunk head bolt M16x35 + self-locking nut and Ø16 washer, stainless steel AISI 304.

Vertical fairlead fix 90° for trolley with bolts included: 1 hex head bolt M16x35, 1 countersunk head bolt M16x35, plus self-locking nut and Ø16 washer, stainless steel AISI 304.

AISI 304 Stainless steel pipe Ø14 mm with thickness 2 mm. Capable of covering 90° corners.

AISI 304 Stainless steel pipe Ø14 mm with thickness 2 mm. Capable of covering 135° corers.

AISI 304 Stainless steel pipe Ø14 mm with thickness 2 mm. Capable of covering 180° corers.

AISI 304 stainless steel support for installing a turnbuckle with closed body or tube. Includes fasteners: M16×35 mm bolt and Ø16 mm stainless steel washer.

Closed-body turnbuckle for tensioning stainless steel AISI 316 cable with one articulated fork end and one swage terminal end.

Closed-body turnbuckle in AISI 316 stainless steel for tensioning steel cable, with two articulated jaw ends.

Terminal with fixed jaw, with crimping sleeve in stainless steel AISI 304

Terminal with jointed jaw, with crimping sleeve in stainless steel AISI 316

AISI 304 stainless steel kit for clamping 8 mm diameter cable, composed of: 4 AISI 304 stainless steel clamps, 1 stainless steel thimble d. 8 mm and 2 heat-shrinkable sleeves.

AISI 304 stainless steel energy absorber. Essential for lifelines shorter than 40–50 m in order to reduce loads on the supports.

Quick release carabiner (not usable with SICURSLIM)

PG Line anchor bracket

Seal for tensioner block

Lifeline identification code

Lifeline sign in Italian

Nuts and bolts kit consisting of: 8 self-lock.+8 d12 washers

Threaded rod dn12 Stainless steel 304 Degreased

Threaded rod dn12 of 18 cm with bolt

Stainless steel gutter dn90 with gasket

Lead V 50x50cm dn90

Tensioner with 250 mm thread in AISI 316 stainless steel for crimping on lifeline. Includes fasteners: 2 nuts and 1 washer.

Closed-body turnbuckle in AISI 304 stainless steel for cable tensioning, with two fixed jaw ends.

AISI 304 stainless steel turnbuckle with 150 mm closed swage terminal. One end fixed fork with Ø12×50 mm locking bolt, other end swage terminal. Hardware included: M12 A2-70 bolt, nut and 2 washers.

Sicurpal's System Register - Inspection and maintenance

Eyebolt and Split pin made in stainless steel AISI 316 Ø16

Document holder with fixing kit

Eye terminal for Ø8 cable, swage type (to be crimped)

Fully threaded screw with countersunk TX40 9x160

Fully threaded screw with countersunk TX40 9x200

Fully threaded screw with countersunk TX40 9x280

Fully threaded screw with countersunk TX40 11x100

Washer M10 diam.

Washer M10 diam.

End stop to be used as a signal to inform the operator about the correct use of PPE, according to the technical project documentation of the fall protection system. Installable on a cable with a diameter of 8 mm.

End stop to be used as a signal indicating a non-usable section of the lifeline or a limit beyond which it is not permitted to proceed. Installable on a cable with a diameter of 8 mm.

End of line UNI 355 signal to be put on the cable

Fully threaded screw with countersunk TX40 9x160

Cable In AISI 316 stainless steel Ø 8 mm 49 strands with identification bar for product traceability.